|
|
.
.
.
|
|
Instructions for STAND ALONE operation:With only dip switches #1 & #9 in the "ON" position, LED's come on at 10% brightness.With only dip switches #2 & #9 in the "ON" position, LED's come on at 20% brightness. With only dip switches #1, #2 & #9 in the "ON" position, LED's come on at 30% brightness. With only dip switches #3 & #9 in the "ON" position, LED's come on at 40% brightness. With only dip switches #1,#3 & #9 in the "ON" position, LED's come on at 60% brightness. With only dip switches #2, #3, & #9 in the "ON" position, LED's come on at 80% brightness. With only dip switches #1, #2, #3 & #9 in the "ON" position, LED's come on at 100% brightness. |
 |
| With only dip switches #4, #7 & #9 in
the "ON"
position, LED's come on at 100% brightness
and strobe at speed 1 (speed 1 being the fastest speed). With only dip switches #5, #7 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 2. With only dip switches #4, #5, #7 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 3. With only dip switches #6, #7 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 4 (speed being the slowest). |
 |
| With only dip switches #8 & #9 in
the "ON"
position, LED's come on at 100% brightness
and thunder strobe at speed 1 (speed 1 being the fastest speed). With only dip switches #6, #8 & #9 in the "ON" position, LED's come on at 100% brightness and thunder strobe at speed 2. With only dip switches #4, #5, #8 & #9 in the "ON" position, LED's come on at 100% brightness and thunder strobe at speed 3. With only dip switches #4, #5, #6 & #9 in the "ON" position, LED's come on at 100% brightness and thunder strobe at speed 4 (speed 4 being the slowest). |
 |
| For DMX Mode: For our 134-ACROBAT: On the first fixture, set dip switch #1 and dip switch #10 to the "ON" position. On the second fixture, set dip switch #1 and dip switch #5 and dip switch #10 to the "ON" position and you will have control of the light using the #2 fixture/scanner button on the DMX controller. To run the lights all at once just set all the lights dip switches to #1 and #10 to the "ON" position. |
 |
| Channel #1 0-4 no function 5-64 strobe from slow to fast 65-128 thunder strobe 129-192 gradual brightness from slow to fast 193-250 gradual dim from slow to fast 251-255 no function Channel #2 -dimmer (slider must be all the way up for functions to work) How to use this light with the American DJ MyDMX software |
 |
| For
MASTER / SLAVE Mode: Connect your slave fixtures to the first can with a DMX cable. On all the slave cans, put dip switch #10 to the ON" position . Then on the first/master fixture set it to any stand alone feature. All the slaves should sync up. |
 |
