![]() | ![]() |
.
.
.

|
|
Instructions for Operation: | ![]() |
| There
is a 4 mode switch on the rear of the unit that allows you pick an
effect. Modes are ON, STROBE FLASH, VOICE CONTROL and OFF. Three knobs give you extra control while in each mode. | ![]() |
| When
the switch is set to ON: The laser will come all on and the motor speed
control knob will allow you to control the speed of the lasers
movements (slow-fast). When the switch is set to STROBE FLASH: The laser will start to flash. The AUTO FLASH knob will control the rate of the flash and the motor speed control knob will allow you to control the speed of the lasers movements (slow-fast). | ![]() ![]() |
| When
the switch is set to VOICE CONTROL: The laser will light up to sound.
The voice control knob will adjust the sensitivity of the mic and the
motor speed control knob will allow you to control the speed of the
lasers movements (slow-fast). While the switch is set to OFF the laser will have no effect. | ![]() ![]() |
![]() |