![]() |
![]() |
.
.
.
|
|
Instructions for operation: |
![]() |
|
Auto mode: |
![]() |
|
Sound active mode: |
![]() |
| For DMX Mode: On the fixture set dip switch #10 to the on position. Connect the controller to the fixture using a DMX cable. Channel #1 controls the left mirror 0-Constant rotation 1-199- Mirror position 200-255- constant rotation Channel #2 controls the right mirror 0-Constant rotation 1-199- Mirror position 200-255- constant rotation Channel #3 0-255 controls the speed of the mirror rotation (fast-slow) Channel #4 0-255controls the LED pattern for the left mirror Channel #5 0-255controls the LED pattern for the left mirror Channel #6 0-255controls the speed of LED pattern rotation for both sides (fast-slow) How to use this light with the American DJ MyDMX software |
![]() |
| For
MASTER / SLAVE Mode: Connect the two fixture by DMX cable. Then set the dip switches on the first fixture to either sound active or auto mode. On the second fixture set all the dip switches EXCEPT #9 to the on position. The lights will sync up and do the same thing. |