| |
.
.
.
|
|
Instructions for Operation:Gobos and Colors:Orange - Angel Green - Biohazard Green - Flower Purple - Rose Light Blue - Spiral Yellow - Squares Red - Stars Dark Blue - Triangle White - Circle 
        |  |
DMX Mode: Set the digital dip to read A001 for the first fixture. These are 4 channel lights so set the second fixture to read A005. Go up in 4 for each of your next fixtures. Channel #1 Pan on X axis Channel #2 Tilt on Y axis Channel #3 Gobo selection 0-5 Closed 6-11 Open 12-17 Gobo #1 18-23 Gobo #2 24-29 Gobo #3 30-35 Gobo #4 36-41 Gobo #5 42-47 Gobo #6 48-53 Gobo #7 54-59 Gobo #8 |
 |
|
60-65 Gobo #1 and #2 change 66-71 Gobo #2 and #3 change 72-77 Gobo #3 and #4 change 78-83 Gobo #4 and #5 change 84-89 Gobo #5 and #6 change 90-95 Gobo #6 and #7 change 96-101 Gobo #7 and #8 change 102-171 Gobo wheel rotation (fast-slow) 172-251 Open flash (slow-fast) 252-255 Open Channel #4 Lamp 0-7 Off 8-247 On (must be on for light to work) 248-255 Reset How to use this light with the American DJ MyDMX software |  |
| Stand
Alone: For sound active mode set the digital display to show (G-1-) For slow running mode set the digital display to show (G-2-) For fast running mode set the digital display to show (G-3-) Set the digital display to (G-4-) for black out. (the light goes dark but the scanner is still on. Use this so the light doesn’t have to go through it’s boot up phase). |  |
| Master
Slave:
Set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Link all the fixtures together by dmx cords. Then set the digital display on the 2nd fixture to read (S-1-). If you want every fixture doing the exact same thing, set all other slaves to read (S-1-) on the digital display. Another feature of master/slave mode is to have the mirror on the scanners sync up and move together as well as move separate ways, while the colors remain the same. This mode works in groups of 4 scanners. Again set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Then set the first slave to read (S-2-), the third to (S-3-), and the fourth to (S-4-) |  |
