![]() | ![]() |
.
.
.
|
|
Instructions for operation:Auto mode:With dip switch #1 in the on position, RED will come on. With dip switch #1,2 in the on position, YELLOW will come on. With dip switch #2 in the on position, GREEN will come on. With dip switch #2,3 in the on position, PURPLE will come on. With dip switch #3 in the on position, BLUE will come on. With dip switch #1,3 in the on position, MAGENTA will come on. With dip switch #1,2,3 in the on position, WHITE will come on. With dip switch #4 in the on position, an RGB color change will start (speed of color change can be controlled with dip switches 1-3). With dip switch #5 in the on position, an RGB color fade will start (speed of color change can be controlled with dip switches 1-3). With dip switch #6 in the on position, all 7 color change will start (speed of color change can be controlled with dip switches 1-3). With dip switch #7 in the on position, all 7 color change will start (speed of color change can be controlled with dip switches 1-3). With dip switch #8 in the on position, the fixture will begin to strobe. | ![]() |
| Speed
control: While in one of the 4 color change modes above, the speed of color changes can be controlled. With dip switches #1,2,3 OFF, the color will change every second With dip switches # 1 ON, the color will change every 5 seconds With dip switches # 2 ON, the color will change every 10 seconds With dip switches # 1,2 ON, the color will change every 15 seconds With dip switches # 3 ON, the color will change every 20 seconds With dip switches # 1,3 ON, the color will change every 25 seconds With dip switches # 2,3 ON, the color will change every 30 seconds With dip switches # 1,2,3 ON, the color will change every minute |
![]() |
DMX mode:Channel #1 controls the color RED Channel #2 controls the color GREEN Channel #3 controls the color BLUE Channel #4 controls the master dimmer Channel #5 000-000 ON 1-5 OFF 6-10 ON 11-255 strobing (slow-fast) Master/Slave mode: Connect the second Lagoon to the first Lagoon using the linking cable. Set the dip switches on the first unit to any auto mode. Then set the second fixture to show dip switch #10 on only. | ![]() |
| Includes black power cord. |