|
|
.
.
.
|
|
Lux Readings at 1 meter:Red 7,250Green 11,250 Blue 19,650 White (open) 38,200 |
 |
Instructions for operation:Start up: Check dip switches make sure all are in the OFF position. Turn the on/off switch on the controller to the ON position. Check to make sure the cable coming out of the controller is connected to the signal in connection on the light. |
 |
Controller: The switch in the top left marked NONE, RISE and FALL. These buttons control the shade of white to make it look like sun rise and sun set and then plain white. There are 3 sliders marked STROBE, APERTURE and COLOR. |
  |
Strobe- When this slider is all the way to the left it closes the shutter. To open it up the shutter bring the slider a 1/4 of the way to the right. After a 1/4 of the way, the light strobes from slow to fast. Aperture- This slider controls the size of the beam from left to right (small to large). Color- This slider will scroll through the colors and past half way the light will begin to a constant scroll. |
 |
|
There
are 8 buttons at the bottom of the controller. The 6 color buttons will
automatically scroll to that color. The two marked open and close are for
the shutter. Press open to bring the light on and press close to black
it out. ***Pressing close does not turn the bulb off*** |
 |
| DMX: Make sure dip switch #10 is in the ON position. Connect the light to the board using a DMX cable. This is a four channel DMX light. Channel #1 0-75 On 76-255 Strobe fast to slow Channel #2 0-255 Aperture small to large Channel #3 0-35 No change in shade of white 36-71 Rise (give white a tint that resembles a sun rise) 72-255 Fall (give white a tint that resembles a sun set) Channel #4 Colors |
  |
 |
 |
| Includes attached black power cord. |  |
| For information on the version of the FS575DMX sold PRIOR to October 2010, Click Here. |  |
