|
|
.
.
.
|
|
Lux Readings at 1 meter:Red 263 Green 461 Blue 921 All On 1,781 How To:This fixture recharges while it is plugged into the wall. The on/off power switch is located on the rear of the unit. The Red/Green indicator light on rear shows the recharge status. Red means charging and green means it’s ready. It has a battery life of 5-7 hours with all 3 colors (6 LED's) at full intensity and 8-12 hours with only 1 color (only 2 LED's) at full intensity. |
 |
Instructions for STAND ALONE operation:**These LED lights can produce many different effects and colors without using a controller. Just use the dip switches on the rear of the light to mix the colors to produce brilliant shades of purple, pink, magenta and more. Each light has multiple dip switches for each color. Make each color combinations your own to fit your event or show.**With only switch#1 on (up), the Green LED's come on at approximately 20% brightness. With only switch#2 on (up), the Green LED's come on at approximately 30% brightness. With only switch#3 on (up), the Green LED's come on at approximately 40% brightness. With only switch#1 & #2 on (up), the Green LED's come on at approximately 60% brightness. With only switch#2 & #3 on (up), the Green LED's come on at approximately 80% brightness. With only switch#1 & #2 & #3 on (up), the Green LED's come on at approximately 100% brightness. With only switch#4 on (up), the Red LED's come on at approximately 20% brightness. With only switch#5 on (up), the Red LED's come on at approximately 30% brightness. With only switch#6 on (up), the Red LED's come on at approximately 40% brightness. |
 |
| With only switch#4 & #5 on (up), the Red LED's
come on at approximately 60% brightness. With only switch#5 & #6 on (up), the Red LED's come on at approximately 80% brightness. With only switch#4 & #5 & #6 on (up), the Red LED's come on at approximately 100% brightness. With only switch#7 on (up), the Blue LED's come on at approximately 35% brightness. With only switch#8 on (up), the Blue LED's come on at approximately 65% brightness. With only switch#7 & #8 on (up), the Blue LED's come on at approximately 100% brightness. With only switch#9 & #2 on (up), the light strobes with Red, Blue and Green LED's on. Use dip switches #4,5,6,7,8 to control the speed of strobe. With only switch#9 & #3 on (up), the changes color the sound. |
 |
DMX mode:Dip switch #10 must be on for DMX mode to work. Slider #1- 0-127 Brightness, low to high (controls overall brightness). 128-249 Strobe from slow to fast 250-255 On Slider #2- Brightness of the Blue LED’s Slider #3- Brightness of the Red LED’s Slider #4- Brightness of the Green LED’s How to use this light with the American DJ MyDMX software |
 |
Master/Slave:Set dip switches #1-8 on the master fixture to the desired numerical value. Connect the second fixture by DMX cord. Then set dip switch #10 of the slave fixture to the "On" position. |
 |
