|
|
.
.
.
|
|
           |
 |
Instructions for operation on models sold after September 2010:Sound Active Mode:Start by pressing the menu button. Keep pressing the mode button until G-1,2 or 3 appears. Then use the up and down button to select auto mode function. DMX Mode: Connect the light to your DMX controller by DMX cable. Then use the menu button on the end of the light to scroll through options until you reach Addr on the LED screen. Hit enter and use the up and down buttons to select the correct address in you DMX chain. Slider #1 on/off and strobing Slider #2 controls pattern rotation Slider #3 controls pattern selection Slider #4 controls x axis Slider #5 controls y axis How to use this light with the American DJ MyDMX software |
 |
Master / Slave Mode: Start by pressing the menu button, keep pressing the mode button until S-1,2,3 or 4 appears. Then use the up and down button to select slave mode you want. S-1- Master and slaves work in sync S-2- Master and slaves work in sync most of the time and change to opposite very little. S-3- Master and slave run opposite all the time S-4- Master and slave each do there own thing syncing up and running opposite from very little |
 |
**Instructions for COBBIT sold PRIOR to September 2010**Sound Active Mode: Using the menu button on the end of the light, scroll until the LED screen reads S.L.n.d. Then press enter. The screen will start blinking. Use the up and down buttons to set the light to master. It will continue to blink for about 10 seconds before setting itself to Sound Active Mode. DMX Mode: Connect the light to your DMX controller by DMX cable. Then use the menu button on the end of the light to scroll through options until you reach Addr on the LED screen. Hit enter and use the up and down buttons to select the correct address in you DMX chain. Slider #1 controls the pan of the mirror Slider #2 controls the tilt of the mirror Slider #3 controls the pattern of the LED's Slider #4 controls the Brightness (must be on for light to work) Slider #5 controls strobe speed from slow to fast Slider #6 puts the light in sound active mode 0=off/down and 255=on/up How to use this light with the American DJ MyDMX software Master / Slave Mode: Using the menu button on the end of the light, scroll until the LED screen reads S.L.n.d. Then press enter. The screen will start blinking. Use the up and down buttons to set the light to master. Connect the second light by DMX cord and repeat the process except instead of selecting master use the up and down buttons to select Slave #1 which is SL 1. |
 |
| Includes black power cord. |  |
