Stage Ape Lighting Stage Ape Lighting

The Lighting you need... at Prices you'll go APE over...


Home

stage ape lighting
     Contact Us:  
     
stage ape
stage ape The Ape PRESIDENT... stage ape
LED UV black light par 64 can with 151 10mm LED's.

2 Channel DMX

Stand alone features include: strobe, sound active with built in mic and master/slave mode.

Color temperature of less than 6000k. Includes 1 amp short fuse. 100,000 hour LED's. Power 30w

Size: 11" X 10" X 9" Weight: 3.5 lbs
 PRESIDENT
stage ape Click Here To Purchase stage ape

Instructions for STAND ALONE operation:

With only dip switches #1 & #9 in the "ON" position,  LED's come on at 10% brightness.

With only dip switches #2 & #9 in the "ON" position, LED's come on at 20% brightness.

With only dip switches #1, #2 & #9 in the "ON" position, LED's come on at 30% brightness.

With only dip switches #3 & #9 in the "ON" position,  LED's come on at 40% brightness.

With only dip switches #1,#3 & #9 in the "ON" position, LED's come on at 60% brightness.

With only dip switches #2, #3, & #9 in the "ON" position, LED's come on at 80% brightness.

With only dip switches #1, #2, #3 & #9 in the "ON" position, LED's come on at 100% brightness.		 PRESIDENT
With only dip switches #4 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 1 (speed 1 being the fastest speed).

With only dip switches #5 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 2.

With only dip switches #4, #5 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 3.

With only dip switches #6 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 4.

With only dip switches #4, #6 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 5.

With only dip switches #5, #6 & #9 in the "ON" position, LED's come on at 100% brightness and strobe at speed 6.

With only dip switches #4, #5, #6 & #9 in the "ON" position,  LED's come on at 100% brightness and strobe at speed 7 ( speed 7 being the slowest speed).		 PRESIDENT
With only dip switches #7 & #9 in the "ON" position, LED's come on at 100% brightness and does multiple flashes to the beat of music.

With only dip switches #8 & #9 in the "ON" position, LED's come on at 100% brightness and does a single flash to the beat of music.

With only dip switches #7, #8 & #9 in the "ON" position, LED's come on at 100% brightness and a flash then dims to the beat of music.		 PRESIDENT
For DMX Mode:

For our 134-acrobat: On the first fixture set dip switches #1 and dip switch #10 to the "ON" position. Set the second fixture dip switch #1 and dip switch #5 and dip switch #10 to the "ON" position and that will give you control of the light using the #2 fixture/scanner button on the DMX controller. To run the lights all at once just set all the lights dip switches to #1 and #10 to the "ON" position.		 PRESIDENT
Channel #1

0-4 no function

5-63 strobe speed from fast to slow

64-68 sound active strobe

69-128 thunder strobe (flashes multiple times)

129-132 thunder strobe sound active

133-192 gradually brightens from slow to fast

193-196 sound active gradual brighten

197-245 gradual dim from slow to fast (comes on full brightness and slowly dims off)

246-250 sound active gradual dim

251-255 no function

Channel #2 -Dimmer

How to use this light with the American DJ MyDMX software
 PRESIDENT
For MASTER / SLAVE Mode:

Connect your slave fixtures to the first can via DMX cable. Put dip switch #10 to the "ON" position on all the slave cans. Then on the first/master fixture set it to any stand alone feature. All the slaves should sync up.		 CORD

Click Here To Purchase

Back


 Copyright 2009 by Stage Ape Lighting