Stage Ape Lighting Stage Ape Lighting

The Lighting you need... at Prices you'll go APE over...


Home

stage ape lighting
     Contact Us:  
     
stage ape
stage ape The Ape WIDE 64... stage ape
Short, Black LED PAR 64 Can with 151 10mm LED's and a 40 Degree Beam Angle...

This LED PAR 64 can puts out 2,620 LUX at 1 meter. (A standard PAR 64 can with a 600 watt halogen bulb and a primary blue color gel in front of it puts out 2,270 Lux at 1 meter).

7 Channel DMX

Stand alone mode features: Sound active with built in mic, Gradual color change, Strobe, Color Selection, and Master/Slave Mode.

Color temp less than 6000k. Includes 1 amp short fuse. 100,000 hour led's. Under 35 watt current draw.

Unit size 11" x 10" x 9" and weighs 3.5 Lbs.
 led cans

stage ape Click Here To Purchase stage ape

Instructions for STAND ALONE operation:

With only switch#1 on (up), the 55 Green led's come on at approximately 20% brightness.

With only switch#2 on (up), the 55 Green led's come on at approximately 30% brightness.

With only switch#3 on (up), the 55 Green led's come on at approximately 40% brightness.

With only switch#1 & #2 on (up), the 55 Green led's come on at approximately 60% brightness.

With only switch#2 & #3 on (up), the 55 Green led's come on at approximately 80% brightness.

With only switch#1 & #2 & #3 on (up), the 55 Green led's come on at approximately 100% brightness.

 side led 64 can

With only switch#4 on (up), the 52 Blue led's come on at approximately 20% brightness.

With only switch#5 on (up), the 52 Blue led's come on at approximately 30% brightness.

With only switch#6 on (up), the 52 Blue led's come on at approximately 40% brightness.

With only switch#4 & #5 on (up), the 52 Blue led's come on at approximately 60% brightness.

With only switch#5 & #6 on (up), the 52 Blue led's come on at approximately 80% brightness.

With only switch#4 & #5 & #6 on (up), the 52 Blue led's come on at approximately 100% brightness.

 front led 64 can

With only switch#7 on (up), the 44 Red led's come on at approximately 35% brightness.

With only switch#8 on (up), the 44 Red led's come on at approximately 65% brightness.

With only switch#7 & #8 on (up), the 44 Red led's come on at approximately 100% brightness.

 stand led 64 can

With only switch#9 & #1 on (up), full brightness, fast color change.

With only switch#9 & #2 on (up), full brightness, medium speed color change.

With only switch#9 & #3 on (up), full brightness, slow color change.

With only switch#9 & #4 on (up), full brightness, fast color change. (Slightly different from #9 & #1)

With only switch#9 & #5 on (up), full brightness, medium color change. (Slightly different from #9 & #2)

With only switch#9 & #6 on (up), full brightness, slow color change. (Slightly different from #9 & #3)

With only switch#9 & #7 on (up), full brightness, fast color change. (Slightly different from above)

With only switch#9 & #8 on (up), full brightness, fast strobe. 

With only switch#9 & #1 & #2 on (up), full brightness, slow color change. (Slower than above)

With only switch#9 & #1 & #2 & #3 on (up), full brightness, very slow color change. (Slower than above)

With only switch#9 & #1 & #2 & #3 & #4 on (up), full brightness, very, very slow color change. (Slower than above)

With only switch#9 & #1 & #2 & #3 & #4 & #5 & #6 & #7 & #8 on (up), flashes on and off and changes color to sound.

 back led 64 can
For DMX Mode:

Slider #1 controls the green LED's

Slider #2 controls the red LED's

Slider #3 controls the blue LED's

Slider #4    0-16 white (red, blue and green LED's on)
                  17-31- red
                  32-47- purple
                  48-63- blue
                  64-79- aqua
                  80-95- green
                  96-120- light green
                  121-255- color change (set speed of color change with slider #5)

Slider #5    0-255 slow to fast color change (when slider #4 is set to 121-255)

Slider #6     0-127- strobe (from slow to fast)
                   128- 131- solid on
                   132-191- strobe fade in (fades from zero to full brightness)
                   192-240- fade (lights up and fades out)       
                   241-255- solid on

Slider #7 Dimmer (slider must be all the way up for the functions to work)

On the first fixture set dip switch #1 and #10 to the ON position. For easy use with our 134-ACROBAT, set the second fixtures dip switch #1 and #5 and dip #10 to the ON position and that will give you control of the light using the #2 fixture/scanner button on the DMX controller. To run the lights all at once just set all the lights dip switches to #1 and #10 to the ON position.


How to use this light with the American DJ MyDMX software		 led 64 dip switches
For MASTER / SLAVE Mode:

Set the MASTER can on any of the STAND ALONE settings above and then connect up to 128 additional cans with DMX linking cables and set all SLAVE cans to have only dip switch #10 on (up). In this configuration, all cans will do the same thing at the same time.		 wide 64 LED Par cam

Click Here To Purchase

Back


 Copyright 2009 by Stage Ape Lighting