 |
 |
The Lighting you need... at Prices you'll go APE over... |
|
|||||
|
|
|
Instructions for STAND ALONE operation:**These LED lights can produce many different effects and colors without using a controller. Just use the dip switches on the rear of the light to mix the colors to produce brilliant shades of purple, pink, magenta and more. Each light has multiple dip switches for each color. Make each color combinations your own to fit your event or show.** |
 |
| With only dip switch #1 on, the Red LED's come on at
low intensity. With only dip switch #2 on, the Red LED's come on at medium intensity. With only dip switch #1 & #2 on, the Red LED's come on at high intensity. With only dip switch #3 on, the Green LED's come on at low intensity. With only dip switch #4 on, the Green LED's come on at medium intensity. With only dip switch #3 & #4 on, the Green LED's come on at high intensity. With only dip switch #5 on, the Blue LED's come on at low intensity. With only dip switch #6 on, the Blue LED's come on at medium intensity. With only dip switch #5 & #6 on, the Blue LED's come on at high intensity |
 |
| With only dip switch #9 on, full brightness, fast pre
set color change. With only dip switch #9 & #7 on, full brightness, slow pre set color change. With only dip switch #8 on, full brightness, sound active color change. |
 |
| DMX mode: Set dip switches #1 & # 10 on the first fixture to the on position. On the second fixture set dip switches #2 & #3 & #10 to the on position. On your DMX controller: Slider #1 is: 0-15 = Off 16-79 = Strobe, slow to fast 80-159= Pulse strobe (fades out and back to bright, slow to fast) 160-255 = On Slider #2- Brightness, low to high (controls overall brightness). Slider #3- Brightness of the red LED’s Slider #4- Brightness of the green LED’s Slider #5- Brightness of the blue LED’s How to use this light with the American DJ MyDMX software |
 |
| This model is not set up for Master/Slave opertion. |
 |
| Includes black power cord. |
 |
