Stage Ape Lighting Stage Ape Lighting

The Lighting you need... at Prices you'll go APE over...


Home

     Contact Us:  
     
stage ape
The Ape BLAZER...
An ultra bright LED panel with 210 10mm LED's (70 red, 70 green, 70 blue). 

This FLOOD panel features a 55 degree beam spread.

This LED panel with all LED's on at 100% puts out 2,820 LUX at 1 meter.

Modes include: sound active with built-in mic, stand alone color change with speed options, strobe, master/slave and DMX.

7 channel DMX.

Power consumption 50 watts. Comes with power cord. 100,000 hr LED's.

Unit size 13" x 7" x 4" and weighs 4.4 Lbs.

 		114 Blazer
stage ape Click Here To Purchase stage ape

BLAZER

Instructions for operation:

 BLAZER

Stand Alone:

With only switch#1 on (up), the Green LED's come on at approximately 20% brightness.

With only switch#2 on (up), the Green LED's come on at approximately 30% brightness.

With only switch#3 on (up), the Green LED's come on at approximately 40% brightness.

With only switch#1 & #2 on (up), the Green LED's come on at approximately 60% brightness.

With only switch#2 & #3 on (up), the Green LED's come on at approximately 80% brightness.

With only switch#1 & #2 & #3 on (up), the Green LED's come on at approximately 100% brightness.

With only switch#4 on (up), the Blue LED's come on at approximately 20% brightness.

With only switch#5 on (up), the Blue LED's come on at approximately 30% brightness.

With only switch#6 on (up), the Blue LED's come on at approximately 40% brightness.

With only switch#4 & #5 on (up), the Blue LED's come on at approximately 60% brightness.

With only switch#5 & #6 on (up), the Blue LED's come on at approximately 80% brightness.

With only switch#4 & #5 & #6 on (up), the Blue LED's come on at approximately 100% brightness.

With only switch#7 on (up), the Red LED's come on at approximately 35% brightness.

With only switch#8 on (up), the Red LED's come on at approximately 65% brightness.

With only switch#7 & #8 on (up), the Red LED's come on at approximately 100% brightness.

Gradual Color Change:

With only switch#9 & #1 on (up), all LED's on at full brightness, speed 7 (fastest) gradual color change.

With only switch#9 & #2 on (up), all LED's on at full brightness, speed 6 (fast speed)  gradual color change. (Slower than above).

With only switch#9 & #1 & #2 on (up), all LED's on at full brightness, speed 5 gradual color change (Slower than above).

With only switch#9 & #3 on (up), all LED's on at full brightness, speed 4 (medium) speed gradual color change.

With only switch#9 & #1 & #3 on (up), all LED's on at full brightness, speed 3 (slow) gradual color change (Slower than above).

With only switch#9 & #2 & #3 on (up), all LED's on at full brightness, speed 2 (slower) gradual color change (Slower than above).

With only switch#9 & #1 & #2 & #3 on (up), all LED's on at full brightness, speed 1 (slowest) gradual color change (Slower than above).

BLAZER


BLAZER
AUTO COLOR CHANGE:

With only switch#9 & #4 on (up), all LED's on at full brightness, speed 5 (fastest) flashes through preset colors.

With only switch#9 & #5 on (up), all LED's on at full brightness, speed 4 (fast) flashes through preset colors.

With only switch#9 & #4 & #5 on (up), all LED's on at full brightness, speed 3 (medium) flashes through preset colors.

With only switch#9 & #6 on (up), all LED's on at full brightness, speed 2 (slow) flashes through preset colors.

With only switch#9 & #4 & #6 on (up), all LED's on at full brightness, speed 1 (slowest) flashes through preset colors.

STROBE:

With only switch#9 & #8 & #4 on (up),  all LED's on at full brightness, speed 3 (fast) strobe.

With only switch#9 & #8 & #5 on (up),  all LED's on at full brightness, speed 2 (meduim) strobe.

With only switch#9 & #8 & #4 & #5 on (up),  all LED's on at full brightness, speed 1 (slow) strobe.
 BLAZER

BLAZERSOUND ACTIVE OPTIONS:

With only switch#9 & #8 & #7 on (up), all LED's on at full brightness, flashes to the beat.

With only switch#9 & #8 & #7 & #1 on (up), Red LED's on at full brightness, flashes to the beat.

With only switch#9 & #8 & #7 & #1 & #2 on (up), Blue LED's on at full brightness, flashes to the beat.

With only switch#9 & #8 & #7 & #2 on (up), Blue and Red (purple) LED's on at full brightness, flashes to the beat.

With only switch#9 & #8 & #7 & #1 & #3 on (up), Green LED's on at full brightness, flashes to the beat.

With only switch#9 & #8 & #7 & #3 on (up), Blue and Green (aqua) LED's on at full brightness, flashes to the beat.

With only switch#9 & #8 & #7 & #4 on (up), all LED's on at full brightness, flashes to the beat and changes color on each beat.

With only switch#9 & #8 & #7 & #5 on (up), all LED's on at full brightness, flashes to the beat and scrolls through 3 colors on each beat.

With only switch#9 & #8 & #7 & #6 on (up), all LED's on at full brightness, flashes 3 times fast then twice slow on each beat.

 BLAZER
DMX MODE:

Slider #1 controls the Blue LED's

Slider #2 controls the Red LED's

Slider #3 controls the Green LED's

Slider #4 is preset color changing

Slider #5 controls the speed of the color changing

Slider #6 Strobe

Slider #7 Dimmer (slider must be all the way up for the functions to work)

On the first fixture, set dip switch #1 and #10 to the ON position. For easy use with our 134-ACROBAT, set the second fixtures dip switch #1 and #5 and #10 to the ON position and that will give you control of the light using the #2 fixture/scanner button on the DMX controller. To run the lights all at once just set all the lights dip switches to #1 and #10 to the ON position.

How to use this light with the American DJ MyDMX software

MASTER/SLAVE:

Set the MASTER can on any of the STAND ALONE settings above and then connect up to 128 additional cans with DMX linking cables and set all SLAVE cans to have only dip switch #10 on (up). In this configuration, all cans will do the same thing at the same time.
 cord

Click Here To Purchase

Back


 Copyright 2010 by Stage Ape Lighting