Stage Ape Lighting Stage Ape Lighting

The Lighting you need... at Prices you'll go APE over...


Home

stage ape lighting
     Contact Us:  
     
stage ape
stage ape The Ape PAR 56 LED S... stage ape
Short, Silver LED PAR 56 Can with 159 10mm LED's and a 35 Degree Beam Angle...

This LED PAR 56 can puts out 4,360 LUX at 1 meter. (A standard PAR 56 can with a 600 watt halogen bulb and a primary blue color gel in front of it puts out 2,270 Lux at 1 meter).

51 Red, 54 Green, 54 Blue LED’s.

Soft edge spot. Built in mic.

5 DMX channels: #1=on/off and strobe, #2=dimmer, #3=Red #4=Green #5=Blue 

Stand alone mode features: Sound active with built in mic, Auto color change.

Color temp less than 6000k. Includes 1 amp short fuse, 100,000 hour LED’s. Under  30 watt current draw.

Size 7.75" x 7.75" x 8" and weighs 2.5 Lbs.
 led cans

stage ape Click Here To Purchase stage ape

Instructions for STAND ALONE operation:

 side led 56 can
With only dip switch #1 on, the Red LED's come on at low intensity.

With only dip switch #2 on, the Red LED's come on at medium intensity.

With only dip switch #1 & #2 on, the Red LED's come on at high intensity.

With only dip switch #3 on, the Green LED's come on at low intensity.

With only dip switch #4 on, the Green LED's come on at medium intensity.

With only dip switch #3 & #4 on, the Green LED's come on at high intensity.

With only dip switch #5 on, the Blue  LED's come on at low intensity.

With only dip switch #6 on, the Blue LED's come on at medium intensity.

With only dip switch #5 & #6 on, the  Blue LED's come on at high intensity 		 front led 56 can
With only dip switch #9 on, full brightness, fast pre set color change.

With only dip switch #9 & #7 on, full brightness, slow pre set color change.

With only dip switch #8 on, full brightness, sound active color change.		 side led 56 can
DMX mode:

Set dip switches #1 & # 10 on the first fixture to the on position.
On the second fixture set dip switches #2 & #3 & #10 to the on position.

On your DMX controller:
Slider #1 is:
    0-15 = Off
    16-79 = Strobe, slow to fast
    80-159= Pulse strobe (fades out and back to bright, slow to fast)
    160-255 = On
Slider #2- Brightness, low to high (controls overall brightness).
Slider #3- Brightness of the red LED’s
Slider #4- Brightness of the green LED’s
Slider #5- Brightness of the blue LED’s

How to use this light with the American DJ MyDMX software		 back led 56 can
This model is not set up for Master/Slave opertion.
 114-56LED-S
Includes black power cord.
 LED

Click Here To Purchase

Back


 Copyright 2009 by Stage Ape Lighting