Instructions for operation:
|
 |
Plug in unit
There is a switch on the rear of the unit with the numbers
1,2 and 3 above. From left to right: (1) is strobe flash (2)
is on (3) is off.
Visibility is best in a dark environment and with fog in the air.
|
 |
Mode 1- strobe flash- Move the switch all the way to
the left for strobe flash mode. This mode has the most control. There
are two black knobs on the rear. These knobs are marked strobe flash
control (right) and motor control (left). While in first mode the
strobe flash knob controls the strobe rate. Turn counter clockwise to
slow the strobe rate. Turn clockwise for a quicker strobe rate. The
second knob is motor control. This knob controllers the movement of the
patterns. Turn counter clockwise for slow to no movement and turn
clockwise for full and quick movement.
Mode 2- Is an all on mode. Plug and go, there are no special controls
for this mode.
|
  |
Sound active mode- A white push switch on the rear of
the unit will take the laser from auto mode to sound active. While
active the laser will come on when music is playing on beat. Push the
button in for sound active mode. Press it in again and it will release
and return to auto mode.
This unit comes with it's stand and mounting bracket. Just screw the
stand into bottom and you are set. Mounting bracket already attached.
|
 |
|
 |
