 |
 |
The Lighting you need... at Prices you'll go APE over... |
|
|||||
|
|
|
Instructions for Operation: |
 |
| Auto and Sound Active Modes:
To chose modes, press the Esc button until it reads one of these: nSta, nStS, nStc or SLAv then press enter to initiate the setting. nSta - auto mode slow (moves slowely while changing gobos nSts - sound active mode ( moves and changes with the beat of music) nStc - auto mode 2 (quick movement while changing gobos) SLAv - slave setting for master slave mode (see master/slave instructions) |
 |
| DMX Mode: Press Esc button until d001-d512 appears. select your fixtures dmx address (ex. if it's your first fixture d001). You also have a choice of 5 channel or 13 channel DMX. Press the Esc button until it reads 5ch or 13ch. Press enter after choosing your desired channel selection. 5 channel mode: Slider #1 Pan Slider #2 Tilt Slider #3 Master dim (must be up/on for colors and gobos to work) Slider #4 Color Slider #5 Gobo |
 |
| 13 channel mode: Slider #1 Pan Slider #2 Fine pan Slider #3 Tilt Slider #4 Fine tilt Slider #5 Pan and tilt speed adjustment Slider #6 Master dim (must be up/on for colors and gobos to work) Slider #7 Red Slider #8 Green Slider #9 Blue Slider #10 Preset colors Slider #11 Color change 0-255 fast to slow Slider #12 Sound active function 0-255 off to on Slider #13 Gobo How to use this light with the American DJ MyDMX software |
 |
| Master/Slave Mode:
Set the first fixture to a sound active or auto function using the Esc and up/down buttons. Then connect the second fixture via DMX cable. Set the second fixture to Slav in modes section. |
 |
