 | |
 |
| Wireless Mic's
|
FARA
16 Channel UHF TD Mic
|
|
|
| Discontinued
Products |
|
These products
are DISCONTINUED. There are no more in stock and none available.
This info is here for customers that purchased these items in
the past and need details or instructions.
| RACKSCREW25 |
**DISCONTINUED
JANUARY 2010**
Bag of 25 black phillips head rack screws with nylon
washers.
View
Details
|
| AMPER-8 |
**DISCONTINUED JANUARY 2010**
8 Space amp rack/flight case. 8 Space front for
rack-mountable
equipment. Removable front and rear covers.
View
Details |
| BENI |
**SOLD PRIOR TO DECEMBER 2011**
3 channel DJ mixer with cross fader and
EQ.
View Details |
| BANDI |
 **SOLD PRIOR TO DECEMBER 2011**
New and Hot! 19
inch rack mount DJ mixer with Digital Sampler.
View
Details |
| MIX-166 |
**DISCONTINUED
JUNE 2010**
19" rack
mount DJ mixer with Digital Sampler.
View
Details |
| MIXSILVER16 |
**DISCONTINUED
JANUARY 2010**
Band mixer with
12 balanced Microphone channels.
View
Details
|
| EQ30 |
**DISCONTINUED
JANUARY 2010**
Dual 15 band EQ from
Speakermax.
View Details
|
| EQ231 |
**DISCONTINUED
JANUARY 2010**
31-Band
Stereo Graphic Equalizer.
View
Details |
| CX-2300 |
 **DISCONTINUED
JANUARY 2010**
2-way stereo/3-way mono crossover.
View
Details |
| EX02 |
**SOLD PRIOR TO DECEMBER 2011**
2-way stereo/3-way mono crossover.
View
Details |
| AMP-350L |
**DISCONTINUED JANUARY 2012**
Amp
for mounting on the back of a speaker cabinet. This amp is intended for
full range speaker cabinets.
View
Details |
| AMP-1200L |
 **DISCONTINUED OCTOBER 2011**
Amp
for mounting on the back of a speaker cabinet. This amp is intended for
sub-woofer speaker cabinets.
View
Details |
| TUVI |
 **DISCONTINUED JANUARY 2011**
2 Wireless hand held VHF mics and 1 two channel receiver.
1/4 inch
output to mixer. On / Off switching and volume level controls for each
channel. Operating range of 150 ft. Carrier frequency range 170-216
MHz. D. Frequency stability +/- .005% crystal controlled. Dynamic range
80> dB. Frequency response 40Hz - 16,000Hz. Hand held
uses 9v
batteries.
View
Details |
| WF18PRO |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JANUARY 2010**
18
inch woofer with cloth accordion edge. 25 to 2k Hz. Average sensitivity
at 1w/1m=100. Magnet weight is 130 ounces, bumped and
vented. 8
OHM, 500 watts rms, 1000
watts peak. 4 inch voice coil. Size: 18.75" x 8.0" , Weight: 27 lbs.
Requires a minimum cutout of 17". Box size: 19.5" x 19.5" x 9.5" , Box
weight: 27.5 lbs.
|
| WF18STORM |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED SEPTEMBER 2010**
NEW
18 inch woofer with cloth accordion edge. 35 to 3k Hz. Average
sensitivity
at 1w/1m=99. Magnet weight is 180 ounces, bumped and vented.
8
OHM, 500 watts rms, 1,000
watts peak. 3 inch voice coil. Size: 18" x 9" , Weight: 25.2 lbs.
Requires a minimum cutout of 16.75". Box size: 18.75" x 19" x 9.5" ,
Box weight: 27.5 lbs.
|
| H1022 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED APRIL 2010**
10" x 22" plastic horn. Metal insert for threaded horn
drivers. This
horn
fits our larger full range cabinets.
|
| H410
|
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED OCTOBER 2011**
4"
X 10" inch molded horn without driver. Use one inch screw on drivers on
this page. Sold individually. Size 10.0" x 5.0" x 4.0" Weight 0.5 lb
|
| BOLTER |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED JUNE 2011**
DRIVER STYLE: Bolt
on Eminence style titanium compression driver. MAGNET WEIGHT: 30
ounces. WATTS RMS.: 100. WATTS PEAK: 200.
FREQUENCY RESPONSE: 1k to 20k Hz. SENSITIVITY (dB@1w/1m): 105. VOICE
COIL: 2", 8 ohms. Replacement coil 413-BOLI-VC. BODY
DIAMETER: 5.5". SIZE: 5.125" x 2.25".
WEIGHT: 5.75 lb
|
| HPT-4A |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JUNE 2010**
Bullet Tweeter. 8 ohm. 2k to 25k Hz.
Average
sensitivity at 1w/1m=115. 250 watts
rms, 500 watts peak. 2.8 inch titanium voice coil. Flush
mount. Suggested crossover frequency 2000 Hz. Unit size
6.25x6.25x3.5 10 lbs.
|
| HPT-6A |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JUNE 2010**
New & Hot! Bullet Tweeter. 8 ohm. 2k to 25k Hz.
Average
sensitivity at 1w/1m=105. 150 watts rms,
300 watts peak. 2 inch titanium voice coil. Flush
mount. Suggested crossover frequency 2000 Hz. Unit size:
4.25"x4.25"x3" , Weight: 5 lbs.
|
| HAN4 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JUNE 2010**
Plastic pocket handle. 5.25" long x 3.5" wide x 3"
deep. Dont forget a
pack of 419-COR-SCREW-1.
|
| HAN5 |
This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions. 
**DISCONTINUED
JUNE 2010**
Strap handle.
10.5" long x 1.25" wide. Dont forget a pack of
419-COR-SCREW-1.
|
| HAN1 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JUNE 2010**
Recessed
bar handle. 8.25" high x 6.5" wide. The size and look of this handle
vary slightly with each shipment, so don't cut a hole in your speaker
until you get the handle in your hand. Dont forget a pack of
419-COR-SCREW-1.
|
| GRILL-C1 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JANUARY 2010**
One grill clamp. Plastic. Screws not included. Dont forget
a pack of
419-COR-SCREW-1.
|
| G12 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JANUARY 2010**
12 inch waffle
grill. Clamps not included. Don't forget 4 of the
422-GRILL-C1 and a pack of 419-COR-SCREW-1.
|
| G15 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JANUARY 2010**
15 inch waffle grill. Clamps not included. Don't forget 4
of the
422-GRILL-C1 and a pack of 419-COR-SCREW-1.
|
| G18 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JANUARY 2010**
18 inch waffle grill. Clamps not included. Don't forget 4
of the
422-GRILL-C1 and a pack of 419-COR-SCREW-1.
|
| T1 |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JULY 2010**
Square terminal plate with two 1/4
jacks and push terminals.
Needs a 3 inch by 2 3/8 inch cut out. Overall size is 3 7/8" X 3 1/4".
Includes 2 pair of wires to connect to 2 speakers. Dont forget a pack
of 419-COR-SCREW-1.
|
| CG-GRAY |
This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JULY 2011**
Charcoal gray speaker carpet, 48 inches wide. Price is per linear foot.
|
| SPKN-2 |
This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JUNE 2010**
4 pin speakon style plug. Easy to use for making
cables, no
soldering required. Size: 1 1/8" wide, 2 7/8" long. This unit
uses a screwing lock to secure to
a terminal.
|
| SPKN-RD |
This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED DECEMBER 2010**
4 pin round speakon style panel mount jack. Size: 2 inches round x
1.25"
long. Sold individually.
|
| SNIB |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JUNE 2010**
25 feet of 2
conductor jacketed 16 gauge cable with dual banana to 1/4 inch. Weight
2.0 lb.
|
| 30Q12Q |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JUNE 2010**
30 feet of 2
conductor jacketed 12 gauge cable with metal 1/4 to 1/4 inch. Weight
1.0 lb.
|
| GRAPE |
 This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JANUARY 2010**
120 volt, 12 gauge, 3 conductor, 50 foot, black extension
cord with one
outlet. Weight 7.5 lbs
|
| 146ZOT
|
This product is DISCONTINUED. There
are no more in stock and none available. This info is here for
customers that purchased this item in the past and need details or
instructions.
**DISCONTINUED
JANUARY 2010**
120 volt, 14 gauge, 3 conductor, 6 foot, black extension
cord with one
outlet. Weight 1 lb
|
| MON-15TD |
 **DISCONTINUED
JUNE 2010**
Stage
monitor with 15" woofer and titanium horn driver. 250 watts R.M.S., 500
watts peaks. Dimensions Face: 29" X 19.25" Bottom: 8.5" X 29 Rear foot:
11.625" X 29" Rear top: 11.25" X 29" Top: 8.75" X 29". Inputs: 2 ea.
1/4" jacks and 2 Speakon. Full length heavy duty honeycomb grill.
Woofer has cloth accordion edge and 50 oz magnet with 2.5" voice coil.
Titanium driver (TD8) with 25 oz magnet, 1.375" voice coil, and 9" X
17" horn. Recessed wooden handles. Textured black spray finish.
Frequency response: 45 Hz - 20 kHz Sensitivity: 99 ± 2 dB (1W @ 1M ) 8
ohms. Shipping weight 58 lb.
See
Details
|
| CAB-H19 |
 **DISCONTINUED AUGUST 2011**
Empty
horn cabinet with 10 x 19 horn, NO driver. Accepts standard 1 3/8 inch
threaded driver. Black carpet covering, black corners, plastic recessed
handles. Inputs: 1 - Speakon style and two 1/4", Rubber feet, 1 3/8
plastic tophat, Size 24" x 17.25" x 19.5". Weight 30 lbs.
See
Details
|
| URBAN-1203 |
**DISCONTINUED DECEMBER 2011**
Full
range POWERED plastic speaker with a single 12 woofer and titanium horn
driver. 160 watts RMS 380 watts peak. Frequency response 40-17KHz.
Sensitivity 96+/-2dB (1w/1m). 8 ohm woofer 40 oz magnet and a titanium
driver with a 1 1/2” voice coil. (+/-) 90 degree x 60 degree constant
directivity horn. 1 XLR or 1/4” mic input. RCA and XLR
input. XLR and 1/4” outputs. Level, volume, bass and treble knobs on
rear. Size: 22" x 14" x 13" and weighs 29 Lbs.
See Details |
| EXELL-1504 |
**DISCONTINUED DECEMBER 2011**
Full
range POWERED plastic speaker with a single 15 woofer and titanium horn
driver. 2 XLR and 1/4” mic inputs with level knob. XLR and RCA line
inputs. XLR and 1/4” line out. Level, volume, bass and treble knobs on
rear. Frequency response 40-17KHz. Sensitivity 112-2dB (1W/1m). 190
Watts RMS, 450 Watts peak. 8 ohm
woofer with 50oz magnet and a titanium driver with a 1 1/2” voice coil.
(+/-) 90 degree x 60 degree constant directivity horn. Size: 27" x 17"
x 17" and weighs 41 Lbs.
See Details |
| ST-215 |
**DISCONTINUED APRIL 2011**
Empty
trapezoid full range speaker cabinet with holes for two 18" woofers.
Black carpet covering and heavy duty square mesh grill. Crossover 500
watt two-way with 4K cut off. Heavy duty black metal handles, black
metal corners. Horn (without driver). 2 Speakon style and two 1/4"
inputs. Built in casters and dolly handle. Size: 44" x 18" x 17".
Weight: 60 Lbs.
See
Details
|
| POWER-FH |
 **DISCONTINUED JULY 2011**
SpeakerMax
Powered folded horn sub woofer with black carpet covering. 18 inch
woofer with 100 oz. magnet and 4 inch voice coil. Woofer is 500 watts
RMS, 1000 watts peak. Frequency response: 35 Hz to 300
Hz.
Sensitivity: 100 db (1W @ 1M). 8 ohms. Cabinet is
made of
3/4 inch Tight-Ply plywood (more layers, more glue, compressed much
more than standard plywood). Amp has 1/4” and XLR line in and out
jacks. Speakon Power out. LPF knob (45Hz-800Hz) and Volume knob on
rear. Size: 37" h x 24.5" w x 36.25" d. Weight: 165
lbs.
See
Details
|
Home
|
|
|
|
|
| Speakers |
 EXELL-1508
Now Available
|
| Mixers
|
BOLO
Available Now |
|
|
