 |
|
 |
| Wireless Mic's
|
207-FARA
16 Channel UHF TD Mic
|
|
|
|
Horns
and Drivers |
|
| 413-H410
|
4"
X 10" inch molded horn without driver. Use one inch screw on drivers on
this page. Sold individually. Size 10.0" x 5.0" x 4.0" Weight 0.5 lb
Purchase Now |
| 413-H515 |
5"
X 15" inch molded horn without driver. Use one inch screw on drivers on
this page. Sold individually Size 15.0 x 6.0 x 5.0 Weight 0.5 lb.
Purchase Now |
| 413-H1022 |
10" x 22" plastic horn. Metal insert for threaded horn drivers. This
horn
fits our larger full range cabinets.
Purchase Now |
| 413-PZD-1 |
DRIVER
TYPE: imported Piezo. BODY DIAMETER: 4 inches. WATTS RMS.: 90. WATTS
PEAK: 180. FREQUENCY RESPONSE: 1.5k to 22k Hz. SENSITIVITY (dB@1w/1m):
98. NOTE: This unit has a coil and 2 capacitors built in next to the
ceramic driver to act as a crossover. Size: 4.125" x 3.0" Weight: 1.0
lb.
Purchase Now |
| 413-PHD-1
|
DRIVER
TYPE: phenolic compression. MAGNET WEIGHT: 20 ounces. BODY DIAMETER: 4
3/4". WATTS RMS.: 75. WATTS PEAK: 150. FREQUENCY RESPONSE: 1K to
15k Hz. SENSITIVITY (dB@1w/1m): 105. VOICE COIL: 2", 8
ohms. NOTE: Although a phenolic horn driver and a Piezo horn driver can
reproduce about the same range, the phenolic driver does it much
smoother with less harshness. That means its easier on your ears. This
is a very popular driver. We've seen it in many catalogs with specs
varying dramatically. Some list it as 80 watts with a high end of 12k
to 20k. We listed the specs as what we think they really are compared
to other drivers we evaluated. Size: 4.75" x 3.0" Weight: 4.75
lb.
Purchase Now |
| 413-TD-2 |
DRIVER TYPE: Perfect for upgrading cabinets with old piezo or phenolic
drivers. MAGNET WEIGHT: 25 oz. WATTS RMS: 50. WATTS PEAK:
100. Can be used in cabinets with a continuous
power rating of up to 400 watts (Should NOT be used without a
crossover). FREQUENCY RESPONSE: 1.5 kHz to 20 kHz. SENSITIVITY (dB@
1w/1m): 102
±2dB. Threaded driver with titanium diaphragm. VOICE COIL:
1.5", 8 ohms. Size: 4.375" x 2.625" WEIGHT: 3.0 lb.
Purchase Now |
| 413-TD-8 |
DRIVER TYPE: Titanium
compression. MAGNET WEIGHT: 15 oZ. WATTS RMS.: 50. WATTS PEAK: 100.
FREQUENCY RESPONSE: 1.5k to 20k Hz.
SENSITIVITY (dB@1w/1m): 102. VOICE COIL: 1 3/8 inch, 8 ohms. BODY
DIAMETER: 3 inches.
WEIGHT: 2.1
Lbs.
Purchase
Now |
| 413-BOLI |
DRIVER STYLE: Eminence
style titanium compression driver. MAGNET WEIGHT: 30 ounces. WATTS
RMS.: 100. WATTS PEAK: 200. FREQUENCY
RESPONSE: 1k to 20k Hz. SENSITIVITY (dB@1w/1m): 105. VOICE COIL: 2", 8
ohms. Replacement coil 413-BOLI-VC. BODY
DIAMETER: 5.5". SIZE: 5.125" x 2.75". WEIGHT:
5.75 lb.
Purchase
Now |
| 413-BOLTER |
DRIVER STYLE: Bolt
on Eminence style titanium compression driver. MAGNET WEIGHT: 30
ounces. WATTS RMS.: 100. WATTS PEAK: 200.
FREQUENCY RESPONSE: 1k to 20k Hz. SENSITIVITY (dB@1w/1m): 105. VOICE
COIL: 2", 8 ohms. Replacement coil 413-BOLI-VC. BODY
DIAMETER: 5.5". SIZE: 5.125" x 2.25".
WEIGHT: 5.75 lb
Purchase
Now |
| 413-BOLT2 |
DRIVER STYLE: Bolt on titanium compression driver with 2" throat.
MAGNET WEIGHT: 65 ounces. WATTS RMS.: 150.
WATTS PEAK: 300. FREQUENCY RESPONSE: 1k to 20k Hz. SENSITIVITY
(dB@1w/1m): 110. VOICE COIL: 3", 8 ohms. BODY DIAMETER: 6". SIZE 6" x
2.5". WEIGHT: 7
lb.
Purchase Now |
| 413-VC-PHD |
Replacement
diaphragm for the style of 413-PHD-1 with the 2.0" voice coil,
phenolic horn driver. Size: 4.0" x 1.5". Weight: 0.5 lb.
Purchase Now |
| 413-VC-TD2 |
Now
in stock the voice coil for 413-TD-2. Assembled titanium dome with
leads and flange. Secondary replacement for 413-TD-2. Soldering
required. Remove old diaphragm from plastic bracing, line up ends of
new leads and solder to contacts. Box size: 4.0" x 4.0" x
1.0"
Box weight:
less than 1.0 lb.
Purchase
Now |
| 413-550-VC
|
Diaphragm
for 413-550CD (eminence style driver). Includes black plastic mounting
cup. Screw this on rear of driver. Unit size: 4.25" in diameter, 1.25"
deep.
Purchase
Now |
| 413-BOLI-VC |
Diaphragm
for 413-550CD (eminence style driver). Includes black plastic mounting
cup. Screw this on rear of driver. Unit size: 3.75" x 3.75" x 1".
Weight: 4 lbs.
Purchase Now |
| 413-BTA |
Adapter for threaded horn drivers to mount on bolt on horns. Plastic.
4" in diameter
Purchase Now |
| 413-VC-TD009C |
Diaphragm for our 12" stage monitor. Unit size:
Purchase Now |
| 413-VC-TD8 |
Diaphragm for our 413-TD-8. Unit size: 2.75" x 3.5".
Purchase
Now |
Back
|
|
Copyright
2009 - Speakermax
|
|
|
|
|
| Speakers |
403-EXELL-1504
Available in Febuary 2010
|
| Mixers
|
202-BOLO
Available Now |
|
|
