|
|
 |
201-AMP-1200L |
 |
| Sub-Woofer Amp |
Amp
for mounting on the back of a speaker cabinet. This amp is intended for
sub-woofer speaker cabinets. 600 watts rms@8ohm, 1,200 watts peak. This
is a list of features on the outside panel, from top to bottom: XLR
& 1/4" line input, XLR & 1/4" line output, Speakon type
output
jack, Volume control,Low Pass Filter knob adjusts from 45Hz to 800 Hz,
red Clip light, red power light, Power switch, Power cord connector.
Switchable for 120v or 220v. Power cable not included. Uses a standard
computer type power cable. Panel size is: 13.75" wide x 15.25" high.
Cut out size is: 12.75" x 14.25". If your speaker cabinet is 3/4"
thick, you will need 3 inches of depth inside the cabinet for the
components on the amplifier board. There are two wires attached to this
module that connect to the woofer if there is no crossover. Weight:
21.4 Lbs.
Purchase
Now |
Back
|
|
Copyright
2009 - Speakermax
|
|
|
|
|
| Extension Cords |
 |
| Audio Patch
Cables
|
|
|
|
