415: Crossovers

Need Help? Call Us At 800 880-0883
415-XO-1
$8.50
8 ohm, 4k High pass crossover for many of our horn drivers. Capable of handling up to 300 watts continuously. Allows all frequencies above 4k Hz to pass through to your horn driver while reducing all frequencies below 4k Hz at a rate of 12 dB per octave. Since most clubs and DJ's boost the extreme high's and low's on their EQ while reducing the mid's, 4k Hz is a perfect crossover point for smooth high's as well as protection for the driver. Since most woofers have a natural roll off that starts somewhere between 800 Hz and 1500 Hz, many popular 2 way speaker cabinets use this crossover on the horn driver and nothing on the woofer.

Add to Wishlist
415-XO-HP
$14.97
HIGH PASS crossover with a 4k Hz crossover point and 18dB per octave slope. Handles 300 watts continuously and 600 watts peak. All components are mounted on a PC board with mounting holes in all 4 corners. No wires attached. You will need to solder wires to this crossover. This is a much higher quality crossover than most others because the Ònorm" is to have a 6dB or 12 dB per octave slope and this has 18. This provides MUCH more protection for any horn driver. 4.25" x 3.5" x 1.5"

Add to Wishlist
415-XO-2W
$19.99
High power 2-way crossover. 4000 Hz cut off, 18 dB per octave. 500 watts continuous. Size: 5.5 x 4.25 x 1.75. **NO CONNECTING SPADES, speaker wires must be soldered to the board.**

Add to Wishlist
415-xo-800FL
$32.55
HIGH POWER!! 800 watt 2 way crossover with lamp fuse protection built in! Crossover point is 3,000 Hz. Sloping ratio is 18dB per octave. There are no wires attached to this crossover. It has standard 1/4 inch spade lugs. You will need to use standard spade connectors or solder wires to it for all connections. Mounting holes in all 4 corners. 7" x 3" x 1.25"

Add to Wishlist
415-XO-3W
$21.57
High power 3-way crossover. High pass is 8000 Hz, mid is between 8000 and 4000 Hz, and low pass is 4000 Hz. 18 dB per octave. 500 watts continuous. Size: 5.5 x 4.25 x 1.75. **NO CONNECTING SPADES, speaker wires must be soldered to the board.**

Add to Wishlist
415-XO-SUB
$15.97
Low pass crossover for subwoofer cabinets. 125 Hz, 500 watts, 12 dB per octave slope.

Add to Wishlist
415-XO-24W
$0.88
24 inch wires to connect crossover to horn or woofer. Medium female spade lugs on one end to connect to crossover. Small spade lugs on other end to connect to woofer or horn driver.

Add to Wishlist
415-XO-36W
$0.99
36 inch wires to connect crossover to horn or woofer. Medium female spade lugs on one end to connect to crossover. Small spade lugs on other end to connect to woofer or horn driver.

Add to Wishlist