413: Horns & Drivers

Need Help? Call Us At 800 880-0883
413-H410
$4.75
4 X 10 inch molded horn without driver. Use one inch screw on drivers on this page. Sold individually. Size 10.0" x 5.0" x 4.0" Weight 0.5 lb

Add to Wishlist
413-H515
$6.50
5 X 15 inch molded horn without driver. Use one inch screw on drivers on this page. Sold individually Size 15.0 x 6.0 x 5.0 Weight 0.5 lb.

Add to Wishlist
413-H1022
$19.95
10 x 22 plastic horn. Metal insert for threaded horn drivers. This horn fits our larger full range cabinets.

Add to Wishlist
413-DPZ1
$2.99
DRIVER TYPE: imported Piezo. BODY DIAMETER: 2.5 inches. WATTS RMS: 65. WATTS PEAK: 90. FREQUENCY RESPONSE: 3.5k to 15k Hz. SENSITIVITY (dB@1w/1m): 90. NOTE: These are not quite as loud as the Original Motorola unit, but they are a lot cheaper. The good news about a PIEZO horn driver is that you have to try real hard to blow them. The bad news is that they sound a little harsh compared to a compression driver with a voice coil and diaphragm. If you just need to add highs to your system and are not in an environment that requires smooth, perfect sound, this will work fine. Most mobile DJ's start out with speakers that use Piezo tweeters because the crowd noise drowns out their harshness. Size 2.50" x 2.75" Weight <1 lb

Add to Wishlist
413-PZD-1
$6.50
DRIVER TYPE: imported Piezo. BODY DIAMETER: 4 inches. WATTS RMS.: 90. WATTS PEAK: 180. FREQUENCY RESPONSE: 1.5k to 22k Hz. SENSITIVITY (dB@1w/1m): 98. NOTE: This unit has a coil and 2 capacitors built in next to the ceramic driver to act as a crossover. Size 4.125 x 3.0 Weight 1.0 lb.

Add to Wishlist
413-PHD-1
$15.50
DRIVER TYPE: phenolic compression. MAGNET WEIGHT: 20 ounces. BODY DIAMETER: 4 3/4 inches. WATTS RMS.: 75. WATTS PEAK: 150. FREQUENCY RESPONSE: 1K to 15k Hz. SENSITIVITY (dB@1w/1m): 105. Now with 2 inch voice coil, 8 ohms. NOTE: Although a phenolic horn driver and a Piezo horn driver can reproduce about the same range, the phenolic driver does it much smoother with less harshness. That means its easier on your ears. This is a very popular driver. We've seen it in many catalogs with specs varying dramatically. Some list it as 80 watts with a high end of 12k to 20k. We listed the specs as what we think they really are compared to other drivers we evaluated. Size: 4.75 x 3.0 Weight: 4.75 lb.

Add to Wishlist
413-TD-2
$19.75
This driver is perfect for upgrading cabinets with old piezo or phenolic drivers. Threaded driver with titanium diaphragm and 1.5 voice coil. 50 watts RMS., 100 watts peak. Can be used in cabinets with a continuous power rating of up to 400 watts (Should NOT be used without a crossover). Frequency response- 1.5 kHz to 20 kHz. Sensitivity- 102 ±2dB (1w @ 1m). 8 ohms. 25 oz magnet. Size: 4.375 x 2.625 Weight 3.0 lb.

Add to Wishlist
413-TD-8
$22.50
Titanium compression driver. MAGNET WEIGHT: 15 ounces. BODY DIAMETER: 3 inches. WATTS RMS.: 50. WATTS PEAK: 100. FREQUENCY RESPONSE: 1.5k to 20k Hz. SENSITIVITY (dB@1w/1m): 102. VOICE COIL: 1 3/8 inch. 8 ohms. 2.1 Lbs.

Add to Wishlist
413-BOLI
$34.50
Eminence style titanium compression driver. MAGNET WEIGHT: 30 ounces. BODY DIAMETER: 5.5 inches. WATTS RMS.: 100. WATTS PEAK: 200. FREQUENCY RESPONSE: 1k to 20k Hz. SENSITIVITY (dB@1w/1m): 105. VOICE COIL: 2 inch. 8 ohms. replacement coil 413-BOLI-VC Size 5.125 x 2.75 Weight 5.75 lb.

Add to Wishlist
413-VC-PHD
$5.95
Replacement diaphragm for the style of 413-PHD-1 with the 2.0 inch voice coil, phenolic horn driver. Size: 4.0' x 1.5 Weight: 0.5 lb.

Add to Wishlist
413-VC-TD2
$9.50
Now in stock the voice coil for 413-TD-2. Assembled titanium dome with leads and flange. Secondary replacement for 413-TD-2. Soldering required. Remove old diaphragm from Plastic backing pre tin ends of new leads and solder to contacts. Box size: 4.0 x 4.0 x 1.0 Box weight: less than 1.0 lb.

Add to Wishlist
413-550-VC
$13.50
Diaphragm for 413-550CD (eminence style driver). Includes black plastic mounting cup. Screw this on rear of driver.

Add to Wishlist
413-BOLI-VC
$14.97
Diaphragm for 413-550CD (eminence style driver). Includes black plastic mounting cup. Screw this on rear of driver. Unit size is 3.75x3.75x1 .4lbs.

Add to Wishlist
413-BTA
$7.00
Adapter for threaded horn drivers to mount on bolt on horns. Plastic. 4 inches in diameter

Add to Wishlist
413-VC-TD009C
$12.99
Diaphragm for our 12" stage monitor.

Add to Wishlist
413-VC-TD8
$13.99
Diaphragm for our 413-TD-8

Add to Wishlist