201: Amplifiers

Need Help? Call Us At 800 880-0883
201-SLIMAMP-150
$134.00
150 watts per channel. We test every amplifier model we sell for it's TRUE power capability. We don't rely on the overly optimistic spec's provided by some manufacturers. This model produces a TRUE, CLEAN 150 watts per channel at 8 ohms. 1 rack space amplifier from Speakermax. 2 x 150 watts @ 8 ohms, 2 x 280 watts @ 4 ohms. Front panel: power switch, power and protect LEDS, channel A and B level knobs, channel A and B LED level meters. Rear panel: balanced XLR and quarter inch inputs, dual banana binding posts and neutrik speaker outputs, input voltage selector, ground lift switch, fuse, 110/220 operation switch. Fan cooled. Frequency response- 20 Hz to 20 kHz. THD- 0.03%. Signal to noise >103 dB. Short circuit protection, overload protection, DC protection, softstart, temperature protection. NOT capable of running at loads below 4 ohms, NOT capable of bridge mono. Size- 19w x 17.75d x 1.75. Weight- 20 lb. For more details, visit www.SpeakerMax.com

Add to Wishlist
201-T210
$127.00
210 watts per channel at 8 ohms. We test every amplifier model we sell for it's TRUE power capability. We don't rely on the overly optimistic spec's provided by some manufacturers. This model produces a TRUE, CLEAN 210 watts per channel at 8 ohms, 375 watts per channel at 4 ohms. Dual cooling fans, RCA inputs; Binding post outputs. Size - 19 x 5.25 x 13.25. 3 rack spaces. Weight - 28 lb. Fuse 156-F6-S

Add to Wishlist
201-T360
$199.00
360 watts per channel. We test every amplifier model we sell for it's TRUE power capability. We don't rely on the overly optimistic spec's provided by some manufacturers. This model produces a TRUE, CLEAN 360 watts per channel at 8 ohms, 675 watts per channel at 4 ohms. Dual cooling fans, RCA inputs; stereo / bridge switch; Binding post outputs. Size - 19 x 18 x 3.5. 2 rack spaces. Weight - 25 lb. Fuse 156-F6-S

Add to Wishlist
201-MAXAMP-450
$299.00
450 watts per channel. This amp is clean sounding playing Hard Fist Pounding rock down to pure classical and Jazz. We test every amplifier model we sell for it's TRUE power capability. We don't rely on the overly optimistic spec's provided by some manufacturers. This model produces a TRUE, CLEAN 450 watts RMS. Per Channel @ 8 Ohms, 680 watts RMS. Per Channel @ 4 Ohms, Low-Z XLR or HI-Z 1/4 inputs, Speakon or Dual banana outputs, Stereo , Parallel or Bridged operation,1 kHz, 0.1% THD, 1 kHz, 0.1% THD, 800W RMS. @ 4 Ohms, 1K Hz, 1% THD Bridge Mono Mode, Total Harmonic Distortion: Less Than 0.1% 20 Hz - 20 kHz @ 8 Ohms, Frequency Response: +/-01db, @ rated output Power / 8 Ohms 20 Hz - 20K Hz, High/Low Pass Filter, Input Sensitivity Selector, Ground Lift, Limiter, Size: 15.7in D x 19.0in W x 3.5in H, Weight: 42 lb. Fuse 156-F30-S.

Add to Wishlist
201-G600
$447.00
600 watts per channel. We test every amplifier model we sell for it's TRUE power capability. We don't rely on the overly optimistic spec's provided by some manufacturers. This model produces a TRUE, CLEAN 600 watts RMS per channel @ 8 Ohms. 1,000 watts RMS per channel @ 4 Ohms. 1350 watts per channel @ 2 Ohms. XLR and 1/4 inputs. Binding posts and speakon outputs. Bridged red speakon output. Stereo and bridge mode switch. Fan cooled. Unit size 19x16x4 weighs 33Lbs.

Add to Wishlist
201-A750
$583.00
750 watts per channel. We test every amplifier model we sell for it's TRUE power capability. We don't rely on the overly optimistic spec's provided by some manufacturers. This model produces a TRUE, CLEAN 750 watts RMS Per Channel @ 8 Ohms. 1200 watts RMS Per Channel @ 4 Ohms. 1400 watts RMS Per Channel @ 2 Ohms. 2800 watts RMS Bridged @ 4 Ohms. 2400 watts RMS Bridged @ 8 Ohms. XLR inputs. Dual Banana and Speakon outputs.

Add to Wishlist
201-AMP-350L
$89.00
Amp for mounting on the back of a speaker cabinet. This amp is intended for full range speaker cabinets. 250 watts rms @ 8ohm, 500 watts peak. This is a list of features on the outside panel, from top to bottom: XLR line input, XLR line output, 1/4" line in, Gain control, High, Mid, Bass, Volume, Green signal light, red power light, Speakon type output jack, Power switch, Power cord connector. Switchable for 120v or 220v. Power cable not included. Uses a standard computer type power cable. Panel size is: 6.25" wide x 15" high. Cut out size is: 5.25" x 14". If your speaker cabinet is 3/4" thick, you will need 3 inches of depth inside the cabinet for the components on the amplifier board. There are two wires attached to this module that connect to the crossover in your speaker, or directly to your woofer if there is no horn or tweeter. Weight: 9.4 Lbs. For more details, visit www.SpeakerMax.com

Add to Wishlist
201-AMP-1200L
$155.00
Amp for mounting on the back of a speaker cabinet. This amp is intended for sub-woofer speaker cabinets. 600 watts rms@8ohm, 1,200 watts peak. This is a list of features on the outside panel, from top to bottom: XLR & 1/4" line input, XLR & 1/4" line output, 200 watt speakon type output jack, Volume control,Low Pass Filter knob adjusts from 45Hz to 800 Hz, red Clip light, red power light, Power switch, Power cord connector. Switchable for 120v or 220v. Power cable not included. Uses a standard computer type power cable. Panel size is: 13.75" wide x 15.25" high. Cut out size is: 12.75" x 14.25". If your speaker cabinet is 3/4" thick, you will need 3 inches of depth inside the cabinet for the components on the amplifier board. There are two wires attached to this module that connect to the woofer if there is no crossover. Weight: 21.4 Lbs. For more details, visit www.SpeakerMax.com

Add to Wishlist