133: Chase Controllers (Not DMX)

Need Help? Call Us At 800 880-0883
133-CHASE-4
$26.97
Self contained 4 channel control with 3 different chase options. The three switch selector located on the front allows you to switch between 2 chase to speed options and a chase to audio using a built in mic. The slow chase option switches channels from 8 seconds to 3 minutes you can adjust the speed by using the speed knob on the front panel. Clockwise for fast and counter clockwise to slow. The normal chase option switches channels from 3 seconds per channel to chasing through all 4 channels in less than a second. Again adjust by using the knob on the front. There are two sockets on each side of the controller. This controller requires 4 plug in adaptors which will be included. 4 green lights to let you know what channel is on at the moment. The power switch and fuse holder are located on the bottom of the controller. This controller can handle 5 amps per channel and has a max load of 6.3 amps. units size 8x6x2 2.3 Lbs.

Add to Wishlist
133-CP1
$54.50
Self contained 4 channel control with 16 different chase patterns built in. Chase to audio with built in mic. Runs thru all 16 patterns randomly. Front panel has audio sensitivity knob, foot switch jack, circuit breaker. 500 watts per ch. 20 amp max for controller. Max 6 pin spots per ch. 3x9x5. 5 lbs. 8 120 volt sockets on rear, (2 per ch). 1 fuse per channel on back panel. Without the foot switch, you have no control of the light show other than the sound sensitivity knob. This is made for DJ's and clubs to mount on their tripods or truss and run pinspots on all night. Linkable with the 137-DIN-1 cable. Optional foot switch 133-CHASE-PAK-FS.

Add to Wishlist
133-SCENE4
$49.97
This is real handy for small productions or bands. Automatic or sound-activated 4 channel controller with individual fader controls. With 5 preset programs that can be selected from a rotary switch. Control functions include auto chase, sound chase,16 patterns for both auto / timer or sound active modes, and a flash program. The Stage 4 can be set to Full On or Blackout. The channel faders can be used in any chase program or in the Full On setting to adjust the intensity of the light fixture. Also features a speed control, sound sensitivity knob, and 4 individually fused AC outlets on rear. 412 Watts max per channel. Fuses 20 mm 5 Amp. Main breaker resettable 15 Amp. Size: 11in x 4.84in x 2.76in Weight: 5.0 lb.

Add to Wishlist
133-F402-LPA
$79.00
PERFECT FOR BANDS !!! Analog only 4 channel chasing foot control. 4 chase patterns in forward or reverse; manual on/off mode, scene mode (each of the 4 scene pedals has 4 individual dimming controls for each of the four channels and they can be adjusted at any time), chase to audio (built in mic or 1/4 line input), and chase to speed; blackout; master dim, manual dim for each channel, speed knob, audio sensitivity knob, and 4-way function foot switch; 8 pin DIN also known as Analog in and out. Works with our 136-DMX-Q. Size - 16.5 x 7.5 x 3. Weight - 6 lbs. cables sold separately

Add to Wishlist