132: Controllers, Non DMX Switch Panels

Need Help? Call Us At 800 880-0883
132-SW8
$14.89
8 lighted rocker switches on front, 8 grounded sockets on rear. 6' power cord. 15 amp breaker on front. 19" rack mount. 2 x 19x 5. 4 lbs. Max 600 watts per channel.

Add to Wishlist
132-ROCKY-8
$31.50
8 channel relay pack. 15 amp breaker, Exclusively for our 132-PILOT8 & 132-NAVIGATOR8. When used with the 132-NAVIGATOR8 from Irradiant, it works fine, but the channels are reversed 8 is 1 and 1 is 8 etc...

Add to Wishlist
132-NAVIGATOR8
$66.50
8 switch panel with 2 built in 4 channel slow chasers for sound active effects like Derby's. Each channel can be set to ON, OFF, TIMER. In the timer mode, each channel can be adjusted to stay on from 30 seconds to 15 minutes. Includes 25' cord & relay pack. Max 600 watts per channel. You can add another relay pack and extension cable. (each relay pack has a 9 pin "in" and "out" jack). 15 Amp circuit breaker, ***This is a life saver for bowling centers and others that don't always have a DJ to run the light show. No more leaving lights on for 3 hours and burning them up! *** 1 year limited warranty through manufacturer.

Add to Wishlist
132-AUTOMATION8
$119.00
Comparable to the Light-Copilot from ADJ. 8 channel remote control switching system with audio & timer. Control has two 4 channel zones. Each zone is switchable from sound active to standard to timed chase (fast to 10 minutes). Built in mic and extra line input. Audio sensitivity knob. This unit allows you to turn a light on while the others remain in chase mode. You can add up to two more relay packs. 8 flash buttons. Black out (stand by) button. Relay packs use triacs instead of mechanical relays. 2 grounded sockets per channel on the relay pack. Controller is 19 x 2.5 x 1.75 (1 rack space), 2 Lbs. Relay pack is 19 x 4 x 4, 5.5 Lbs. Includes one 25' cable. Max load is 15 amps per channel and 15 amps per pack. Accessories: 137-LCR-25, 137-LCREX50, 132-REMOTE-RELAY

Add to Wishlist
132-REMOTE-RELAY
$54.50
8 channel relay pack for our 132-AUTOMATION. Relay pack uses triacs instead of mechanical relays. 2 grounded sockets per channel on the relay pack. Relay pack is 19 x 4 x 4, 5.5 Lbs. Max load is 8 amps per channel and 15 amps per pack. Accessories: 137-LCR-EX25, 137-LCREX50. Includes 9 - 12V DC power source for controller when used with 132-AUTOMATION

Add to Wishlist
132-FOOT4
$134.99
Back for a Limited engagement. The FOOT-4 is a 16 program foot controller, Foot controller powered through included relay pack, 4 channels with on/off switches, Four chase options: 16 pattern sound activation with sensitivity adjustment, Adjustable timed chase, Full on override, Blackout override, Load: 10.0 Amp per channel & 15.0 Amp per unit. Manual override available for all control options, Includes 1 relay pack with 8 sockets (2 sockets per channel) and 25.0 ft. linking cable, Main breaker 15 Amp resettable, Relay size: 8.25 x 7.65 x 2.75 & 5.0 lb. Foot switch size: 12.0 x 6.5 x 3.0 & 4.0 lb.

Add to Wishlist